For a long time, Richard Mille has been exploring the road of technological breakthroughs. The new RM 74-02 equipped with the brand’s self-made automatic tourbillon movement is quietly receiving the attention of the past people in the window. The skeletonized design aesthetic is once again reinterpreted by Richard Mille. Today we will take a detailed look at this excellent tourbillon replica watches.
First of all, let’s talk about the material of this watch. Richard Mille uses high-tech materials to make this watch. And the watchmaker has made its carbon fiber through a special treatment. Different from ordinary carbon fiber, Gold Carbon TPT® gold carbon fiber is a high-tech material. It consists of 600 parallel carbon fiber layers obtained by separating carbon filaments. The watchmaker soaks the thin layers, no thicker than 30 microns, in the black matrix, which the watchmaker then assembles using a machine specially designed to stack the thin layers so that the filaments between the layers of the watch are at a 45-degree angle to the gold foil layers Staggered arrangement. fake watches uk
Because gold is chemically a precious metal, engineers at NTPT. And RICHARD MILLE had a hard time making sure it “fused” to carbon fiber accurately. The watchmaker heats the material to 120°C. And pressurizes it to 6 bar in an autoclave similar to that used to make aerospace parts, before sending it to Richard Mille’s factory for processing.
We can see from the front real shot that this RM 74-02 retains the brand’s iconic barrel-shaped case design. The movement exudes a unique personality. Richard Mille machined the base plate and bridge of the RM 74-02 from 18K 5N red gold and 18K 3N gold respectively. Both by hand microblasting and beveling. Of course, whether the skeletonized design will lose the stability of the watch, in fact, the skeletonized bottom plate. And bridge plate have undergone intensive and complete verification testing to confirm their own ability to resist impact.
The design and execution of this watch represent the overall concept of movement, case and dial. Therefore, the watchmaker’s process is built to extremely strict specifications. For example, this watch no longer uses case rings, but uses titanium screws to secure the movement. You can see that from the details of the tourbillon movement at 6 o’clock to the entire watch. They cannot isolate any link, and the entire watch is a complete individual. The movement of the RM 74-02 is the brand-made CRMT5 movement with a 50-hour power reserve. This movement can set the level of the oscillating weight according to the activity of the wearer. Richard Mille adjusted the movement parts by adjusting the two movable weights to the proper position and fixing them in place with spline screws. The watch travels accurately.
This type of balance wheel represents the pinnacle of innovation. Richard Mille replica designed it so that the inertia of the movement of the movement increases when the two counterweights are brought close to each other during shocks and when the movement is being assembled or disassembled, thereby accelerating the barrel. When the two pendulums are placed at the ends of the pendulum, the inertia is reduced and the winding speed of the barrel is slowed down. So it gets better timing over time and therefore more accurate and repeatable calibration. Richard Mille designed the crown as an octagonal star, and the three-layer case has two nitrile rubber O-rings and is water-resistant to 50 meters. The watchmaker assembled the case from 20 grade 5 titanium alloy spline screws and 316L stainless steel wear-resistant washers.
This type of balance wheel represents the pinnacle of innovation. Richard Mille replica designed it so that the inertia of the movement of the movement increases when the two counterweights are brought close to each other during shocks and when the movement is being assembled or disassembled, thereby accelerating the barrel. When the two pendulums are placed at the ends of the pendulum, the inertia is reduced and the winding speed of the barrel is slowed down. So it gets better timing over time and therefore more accurate and repeatable calibration. Richard Mille designed the crown as an octagonal star, and the three-layer case has two nitrile rubber O-rings and is water-resistant to 50 meters. The watchmaker assembled the case from 20 grade 5 titanium alloy spline screws and 316L stainless steel wear-resistant washers.
Leave a Reply